АQUA

Gallery

Gallery

Model

Cover

Color

Door Aqua - section of door leaf

ACCESSOIRIES

two stainless hinges
tempered clear or frosted glass. For model 4 - safety glass
stainless lock available in three version: for key lock, for cylinder insert, for bathroom
frame

FRAMES

metal angle large frame каса with width of profile 100 mm., maded from two-sided zink coated steel sheet with width 1.2 mm. Frame is equipted with two hinges, seal and six mounting dowels.
there is possibility frame to be ordered in following variants:
- for instalation by ready floor – level „0”
- ffor installation by digging into the floor screed - level "-30"

NOTES

it can be mounted self-closer
norm: PN

EXTRA CHARGES

size „100”
metal ventilation grid
frame: colours from GROUP II polyester paint Premium
frame: colours from GROUP III polyester paint Premium
frame profile width from 80 mm. to 100 mm. without extra charge
expanding of profile of frame from 106 mm. to 390 mm.
reinforcement of metal frame for self-closing mechanism
handle

Model	Model Solid, Model 1, Model 2, Model 3, Модел 4
Cover	CPL HQ 0.7
Color	ANTHRACITE HPL/CPL

Enquiry

More products

PORTA GLASS

Door with glass 8 mm. in set with wooden or metal frame.

PORTA OSLO

Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF.

PORTA ART DECO

UV acrylic paint is highly resistant to: - dirt (coff ee, alcohol, grease) - abrasion - scratches - impacts.

PORTA DUO

Door leaf construction - The door leaf consists of: a wide, painted panel and a narrow stile covered with natural or synthetic veneer. For a glazed model we use 8 mm thick, frosted, tempered glass which is a construction element of the door leaf. Painted white part has a satin smooth surface which is achieved thanks to UV painting technology. Natural veneer is protected with ecological water varnishes, hardened under UV lamp (semi-matt effect).

PORTA DESIRE UV

Door leaf construction - Honeycomb or hollow chipboard core reinforced with glued wood rails and stiles (at an extra charge). The construction is skinned with HDF. Satin look, smooth surface is achieved thanks to UV painting technology. Model 3 and 4 with decorative door inlays (inlays colours: silver or black).

PORTA GRANDE UV

Door leaf construction - Satin look, smooth surface is achieved thanks to UV painting technology. It is possible to produce model A.1 with a mirror on one or on both sides. If the mirror is only on one side, there is a solid board on another side. There is a possibility to choose decorative slats made of solid oak, which are flush with the surface of door leaf panels (model F). Another option are slats in synthetic or natural veneer or brushed aluminium which are recessed in comparison to the surface of door leaf panels (model G).

PORTA ROYAL PREMIUM

Door leaf construction - Stabilising infill or chipboard core (extra charge) skinned with embossed HDF.

PORTA VECTOR PREMIUM

Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF.

PORTA FOCUS PREMIUM

Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF. Glazed models come with 8 mm thick, frosted tempered glass, which is an element of the construction.

PORTA LUMUA, NATURA LUMIA

Loft-style door, with elegant wooden beams and transparent tempered glass 6 mm., with passive handle and hidden hinges

PORTA VERTE HOME, GROUP B

Door leaves contain rails, slim panels and 4 mm thick, frosted, tempered glass. Combination of those depends on a model.

PORTA VERTE HOME, GROUP C

Door leaves contain rails, slim panels and 4 mm thick, frosted, tempered glass. Combination of those depends on a model.