PORTA RESIST

Gallery
Model
MODEL 1.1
MODEL 1.2
MODEL 1.3
MODEL 1.4
MODEL 7.1
MODEL 7.2
MODEL 7.3
MODEL 7.4
MODEL B.1
MODEL E.1
MODEL H.1
MODEL 4.A
MODEL 4.A black glass
MODEL 4.B
MODEL WITH PORTHOLE
Cover
Color


Porta Resist - horizontal stripe


Porta Resist - vertical stripe


Porta Resist - inlay in colour black or silver


Porta Resist - frosted or black glass model 4.A


Porta Resist - honeycomb filling


Porta Resist - perforated chipboard filling

Porta Resist - full chipboard filling

DOOR LEAF CONSTRUCTION

Honeycomb or hollow chipboard core (at an extra charge) reinforced with rails and stiles. Models 1.4, 1.7 - chipboard core, 4.B - hollow chipboard core. The construction is skinned with HDF. lipping ABS tape on the side edges. Inlays - black or silver, 6 mm
wide. 4.A and 4.B models come with 8 mm thick, tempered glass, which is an element of the construction.

ACCESSORIES INCLUDED IN THE DOOR LEAF PRICE

  • rebated doors: two or three standard barrel hinges or PRIME hinges; non-rebated: two 3D hinges
  • lock: key lock, WC lock, or cylinder lock
  • glazing - models of gr. 1 and 7 ‘chinchilla’ glass; frosted tempered glass; transparentglass. Models of gr. 4 - 8 mm thick frosted tempered glass
  • round pull handle (for sliding doors)

DOOR FRAMES

Recommended rebated door frames:


Frame Minimax in syntetic veneer


Frame Porta System in syntetic veneer


Metal frames in polyester paint Premium

Recommended non-rebated door frames:


Frame Porta System Elegance in syntetic veneer


Metal frame Porta System Elegance in polyester paint Premium


Non-rebated angle bar frame in polyester paint Premium

NOTES

  • the door leaf is skinned with a Gladstone/Halifax board (with structure), a door frame is fi nished with matching CPL veneer 0,2 mm
  • ventilation grille, ventilation sleeves and preparation for shortening are not available for group 4
  • chipboard core have preparation for shortening as a standard.
  • size ‘100’ and ‘110’ is not available for models 1.4, 7.4.
  • size ‘110’ is available only with hollow chipboard. Glazing size is the same as for size ‚‘100’.
  • size ‘110’ is not available for models of gr. 4.
  • fixed size of glass, model 4.A.
  • black glazing is available for model 4.A (optionally at extra charge)
  • magnetic lock is not available for a double door.
  • double doors are available in any door leaf size combinations.
  • for non-rebated double door, ‚active’ and ‚passive’ door leaves must be ordered.
  • size ‘80’ and ‘90’ in investment norm (clear opening width 800, 900 mm) available as a standard (applies to gr. 1 and 7) - without extra charge
  • reinforcement for a door closer requires third hinge
  • investment set is available only with hollow or chipboard core
  • investment set is available with a rebated door frame: Porta SYSTEM, Steel Porta SYSTEM, Steel adjustable, Corner profi le - SMALL and LARGE
  • sizes ‚100’ and ‚110’ reguire third hinge
  • PRIME or 3D hinges - packed with a door frame
  • thanks to TechnoPORTA AQUA STOP technology door leaves fi nished with CPL HQ have lower edges protected against humidity

EXTRA CHARGES

  • size ‘100’ and ‘110’
  • hollow chipboard core
  • chipboard core
  • investment set (extra charge added to a door leaf )
  • investment set (extra charge added to a door frame)
  • OFFER - PRIME set
  • gold 3D hinges (extra charge added to door frame price)
  • third 3D hinge - silver, white, black(extra charge added to door frame price)
  • third 3D hinge - gold (extra charge added to door frame price)
  • ventilation grille (only group 1 and 7), ventilation sleeves or ventilation undercut
  • magnetic lock with stainless steel faceplate
  • magnetic lock: white, black (for non-rebated doors)
  • preparation for shortening (maximum 60 mm) (apart from gr. 4)
  • reinforcement for door closer (third hinge is required)
  • stainless steel porthole (model 1.1, 7.1)
  • automatic threshold seal
  • hook lock with side pull handles (sliding doors)
  • oblong pull handle for sliding doors
  • caps for standard hinges
  • handle with an escutcheon

 

Model MODEL 1.1, MODEL 1.2, MODEL 1.3, MODEL 1.4, MODEL 7.1, MODEL 7.2, MODEL 7.3, MODEL 7.4, MODEL B.1, MODEL E.1, MODEL H.1, MODEL 4.A, MODEL 4.A black glass, MODEL 4.B, MODEL WITH PORTHOLE
Cover GLADSTONE
Color WHITE OAK, SAND OAK, BROWN OAK, NATURAL HALIFAX, OAK SHERMAN, NATURAL OAK CASELLA, OAK HALIFAX TABAK
Enquiry
More products
PORTA GLASS

PORTA GLASS

Door with glass 8 mm. in set with wooden or metal frame.

more
PORTA OSLO

PORTA OSLO

Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF.

more
PORTA ART DECO

PORTA ART DECO

UV acrylic paint is highly resistant to: - dirt (coff ee, alcohol, grease) - abrasion - scratches - impacts.

more
PORTA DUO

PORTA DUO

Door leaf construction - The door leaf consists of: a wide, painted panel and a narrow stile covered with natural or synthetic veneer. For a glazed model we use 8 mm thick, frosted, tempered glass which is a construction element of the door leaf. Painted white part has a satin smooth surface which is achieved thanks to UV painting technology. Natural veneer is protected with ecological water varnishes, hardened under UV lamp (semi-matt effect).

more
PORTA DESIRE UV

PORTA DESIRE UV

Door leaf construction - Honeycomb or hollow chipboard core reinforced with glued wood rails and stiles (at an extra charge). The construction is skinned with HDF. Satin look, smooth surface is achieved thanks to UV painting technology. Model 3 and 4 with decorative door inlays (inlays colours: silver or black).

more
PORTA GRANDE UV

PORTA GRANDE UV

Door leaf construction - Satin look, smooth surface is achieved thanks to UV painting technology. It is possible to produce model A.1 with a mirror on one or on both sides. If the mirror is only on one side, there is a solid board on another side. There is a possibility to choose decorative slats made of solid oak, which are flush with the surface of door leaf panels (model F). Another option are slats in synthetic or natural veneer or brushed aluminium which are recessed in comparison to the surface of door leaf panels (model G).

more
PORTA ROYAL PREMIUM

PORTA ROYAL PREMIUM

Door leaf construction - Stabilising infill or chipboard core (extra charge) skinned with embossed HDF.

more
PORTA VECTOR PREMIUM

PORTA VECTOR PREMIUM

Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF.

more
PORTA FOCUS PREMIUM

PORTA FOCUS PREMIUM

Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF. Glazed models come with 8 mm thick, frosted tempered glass, which is an element of the construction.

more
PORTA LUMUA, NATURA LUMIA

PORTA LUMUA, NATURA LUMIA

Loft-style door, with elegant wooden beams and transparent tempered glass 6 mm., with passive handle and hidden hinges

more
PORTA VERTE HOME, GROUP B

PORTA VERTE HOME, GROUP B

Door leaves contain rails, slim panels and 4 mm thick, frosted, tempered glass. Combination of those depends on a model.

more
PORTA VERTE HOME, GROUP C

PORTA VERTE HOME, GROUP C

Door leaves contain rails, slim panels and 4 mm thick, frosted, tempered glass. Combination of those depends on a model.

more