Porta GRANDDECO

Gallery

Model

Cover

Color

Porta Granddeco - frosted glass

Porta Granddeco - elegant panel

Porta Granddeco - honeycomb filling

Porta Granddeco - perforate chipboard filling

Porta Granddeco - solid chipboard filling

DOOR LEAF CONSTRUCTION

Honeycomb hollow, chipboard core reinforced with rails and stiles is available at an extra charge (models 1.1, 2.1, 3.1, 4.1, 5.1, 6.1). The construction is skinned with HDF.

ACCESSORIES INCLUDED IN THE DOOR LEAF PRICE

two or three standard barrel hinges, PRIME set available
three hinges for size ’100’ or ‘110’
lock: key lock, WC lock, or cylinder lock
glazing: frosted, tempered glass or ‘chinchilla‘ glass
round pull handle (for sliding doors)

DOOR FRAMES

Recommended rebated door frames:

Frame Minimax in syntetic veneer

Frame Porta System in syntetic veneer

Metal rebated frames in finish polyester paint Premium

Recommended non-rebated door frames:

Frame Porta System Elegance in syntetic veneer

Frame Level in syntetic veneer

NOTES

technical Assessment AT-15-6515/2016, ITB Warsaw.
double doors are available in any door leaf size combinations. For a double non-rebated door, ‚active’ and ‚passive’ door leaves must be ordered
magnetic lock is not available for a double door
reinforcement for door closer requires third hinge
hollow chipboard core has preparation for shortening as a standard
size ‘110’ is available only with hollow chipboard. Glazing size is the same as for size ‘100’

EXTRA CHARGES

size ‘100’ and ‘110’
chipboard core (glazed door leaves)
ventilation grille, ventilation sleeves or ventilation undercut
PRIME hinges (applies to dedicated door frames)
PRIME lock with glossy faceplate (silver or gold)
gold 3D hinges (an extra charge added to a door frame price)
third 3D hinge - silver (an extra charge added to a door frame price)
third 3D hinge - gold (an extra charge added to a door frame price)
magnetic lock
preparation for shortening (maximum 60 mm)
reinforcement for door closer (third hinge is required)
stainless steel porthole
hook lock with side pull handles (sliding doors)
oblong pull handle for sliding doors
caps for standard hinges (set for 1 pcs)
handle with an escutcheon

Model	Model 1.1, Model 1.2, Model 1.3, Model 2.1, Model 2.2, Model 2.3, Model 3.1, Model 3.2, Model 5.1, Model 5.2, Model 6.1, Model 6.2
Cover	PORTASYNCHRO 3D
Color	WENGE WHITE, NORVEGIAN PINE, SILVER ACACIA, SCARLET OAK, DARK OAK

Enquiry

More products

PORTA GLASS

Door with glass 8 mm. in set with wooden or metal frame.

PORTA OSLO

Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF.

PORTA ART DECO

UV acrylic paint is highly resistant to: - dirt (coff ee, alcohol, grease) - abrasion - scratches - impacts.

PORTA DUO

Door leaf construction - The door leaf consists of: a wide, painted panel and a narrow stile covered with natural or synthetic veneer. For a glazed model we use 8 mm thick, frosted, tempered glass which is a construction element of the door leaf. Painted white part has a satin smooth surface which is achieved thanks to UV painting technology. Natural veneer is protected with ecological water varnishes, hardened under UV lamp (semi-matt effect).

PORTA DESIRE UV

Door leaf construction - Honeycomb or hollow chipboard core reinforced with glued wood rails and stiles (at an extra charge). The construction is skinned with HDF. Satin look, smooth surface is achieved thanks to UV painting technology. Model 3 and 4 with decorative door inlays (inlays colours: silver or black).

PORTA GRANDE UV

Door leaf construction - Satin look, smooth surface is achieved thanks to UV painting technology. It is possible to produce model A.1 with a mirror on one or on both sides. If the mirror is only on one side, there is a solid board on another side. There is a possibility to choose decorative slats made of solid oak, which are flush with the surface of door leaf panels (model F). Another option are slats in synthetic or natural veneer or brushed aluminium which are recessed in comparison to the surface of door leaf panels (model G).

PORTA ROYAL PREMIUM

Door leaf construction - Stabilising infill or chipboard core (extra charge) skinned with embossed HDF.

PORTA VECTOR PREMIUM

Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF.

PORTA FOCUS PREMIUM

Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF. Glazed models come with 8 mm thick, frosted tempered glass, which is an element of the construction.

PORTA LUMUA, NATURA LUMIA

Loft-style door, with elegant wooden beams and transparent tempered glass 6 mm., with passive handle and hidden hinges

PORTA VERTE HOME, GROUP B

Door leaves contain rails, slim panels and 4 mm thick, frosted, tempered glass. Combination of those depends on a model.

PORTA VERTE HOME, GROUP C

Door leaves contain rails, slim panels and 4 mm thick, frosted, tempered glass. Combination of those depends on a model.