PORTA CPL

Porta CPL - glass frame

Porta CPL - honeycomb filling

Porta CPL - perforated chipboard filling

Porta CPL - full chipboard filling

DOOR LEAF CONSTRUCTION

ACCESSORIES INCLUDED IN THE DOOR LEAF PRICE

• lock: key lock, WC lock, or cylinder lock
• rebated doors: two or three standard barrel hinges or PRIME hinges; non-rebated: two 3D hinges
• glazing - ‘chinchilla’ glass or frosted/transparent tempered glass (optionally at an extra charge)
• preparation for shortening - max. 60 mm (only group 5)
• round pull handle (for sliding doors)

DOOR FRAMES

NOTES

• norm PN EN 14351-2:2018-12.
• hollow chipboard core and chipboard core have preparation for shortening as a standard.
• size ‘110’ is available only with hollow chipboard.
• glazing size is the same as for size ‘100’.
• size ‘100’ and ‘110’ is not available for model 1.4.
• black fi nish is not available for models of group 5
• double doors are available in any door leaf size combinations.
• passive door leaf (standard) is available for sizes from ‘60’ to ‘100’.
• passive door leaf (side panel) - sizes ’30’, ’40’, ’50’ is available only in fl at option (without glazing or decorative mouldings). For non-rebated double door ‘active’ and ‘passive’ door leaves must be ordered.
• possibilities of ordering bespoke door models through Porta CONTRACT p. 226.
• magnetic lock is not available for a double door.
• size ‘80’ and ‘90’ in investment norm (clear opening width 800, 900 mm) available as a standard- without extra charge.
• reinforcement for a door closer requires third hinge.
• all of the stainless steel panels are available only for sizes: 80, 90, 100, for doors with hollow chipboard core or chipboard core
• investment set is available only with hollow or chipboard core
• investment set is available with a rebated door frame: Porta SYSTEM, Steel Porta SYSTEM, Steel adjustable, Corner profile - SMALL and LARGE
• sizes ‚100’ and ‚110’ require third hinge
• PRIME or 3D hinges - packed with a door frame
• thanks to TechnoPORTA AQUA STOP technology door leaves fi nished with CPL HQ have lower edges protected against humidity

EXTRA CHARGES

• size ‘100’ and ‘110’
• hollow chipboard core
• chipboard core
• inverse glazing
• stainless steel porthole - model .
• CPL fi nish 0,2 and 0,7 mm - GROUP II
• investment set (extra charge added to a door leaf )
• investment set (extra charge added to a door frame)
• OFFER - PRIME set
• gold 3D hinges (extra charge added to door frame price)
• third 3D hinge - silver, white, black (extra charge added to door frame price)
• third 3D hinge - gold (extra charge added to door frame price)
• ventilation grille (only group 1), ventilation sleeves or ventilation undercut
• magnetic lock with stainless steel faceplate
• magnetic lock: white, black (for non-rebated doors)
• preparation for shortening (maximum 60 mm) (group 1)
• reinforcement for door closer (third hinge is required)
• frosted/transparent glass - model 1.2
• frosted/transparent glass - model 1.3 and 1.4
• frosted/transparent glass - model 1.5
• frosted glass - models of group 5 (1PCs of glass)
• stainless steel porthole (model 1.1)
• push panel - both sides set (models 1.1, 1.2)
• kick panel both sides set (models 1.1, 1.2, 1.3)
• kick panel with a ventilation undercut - both sides set (models 1.1, 1.2, 1.3)
• ventilation kick panel - both sides set (models 1.1, 1.2, 1.3)
• hook lock with side pull handles (sliding doors)
• oblong pull handle for sliding doors
• automatic threshold seal
• caps for standard hinges
• handle with an escutcheon