AGAT PLUS
DOOR LEAF CONSTRUCTION
Door leaf frame is made of glued laminated softwood. It is reinforced with stiles. Door leaf is skinned with a layer of aluminium sheet and wood-based board. Door leaves with silver decorative inlays are available. Natural veneers are finished with semi-matt varnish. A door leaf finished with CPL HQ or Gladstone/Halifax has lipping ABS on the side edges.ACCESSORIES INCLUDED IN THE AGAT DOOR PRICE
• One or two locks with security pins• Three barrel hinges
• Three dog bolts
• Door frame equipped with a standard stainless steel threshold (90 mm)
DOOR FRAMES
• Corner profile steel door frame, profile 105 mm wide. Made from both sides galvanized steel sheet 1,2 mm thick• Equipped with three barrel hinges, rubber seal set circumferentially.
• PROJECT BIS, PROJECT PREMIUM door frames
NOTES
• Technical Assessment ITB-KOT-2017/0096 issue 1.• Preparation for shortening (maximum 60 mm)
• Acoustic rating Rw=32 dB (32÷36 dB)
• A solid model of AGATE with a glass applique is not available without a door viewer
• When ordering MDF door frame, architraves has to be ordered as well
• Threshold is a part of steel AGATE door frame
EXTRA CHARGES
• door viewer• size ’100’
• adjustable lock strike plate (steel door frame)
• door frame: CPL 0,2 mm veneer– GROUP II
• door leaf: CPL 0,2 mm and 0,7 mm veneers– GROUP II
• door leaf: Gladstone/Halifax finish, vertical graining
• white or black glass applique (for solid models)
• decorative inlays for synthetic veneers (for 1 side, for both sides – the price x 2)
• decorative inlays for natural veneers (for 1 side, for both sides – the price x 2)
• door leaf: Natural veneer, White Oak, Satin
• door leaf: Natural veneer, Oak, Satin (other colours)
• door leaf: Natural veneer: Walnut
• adjustable door frame: Natural veneer, White Oak, Satin
• door frame: Natural veneer, Oak, Satin (other colours)
• door frame: Natural veneer, Walnut
• 6 dowel pins - AGATE door frame
• steel door frame: colours - GROUP II
• steel door frame: black
• steel door frame profile for PROJECT BIS cover
• steel door frame profile for PROJECT PREMIUM cover
• steel door frame profile from 106 to 150 mm
• steel door frame profile from 151 to 270 mm
• steel door frame profile from 271 to 390 mm
• reinforcement for a door closer for a steel door frame
• cylinder inserts
• a handle with an escutcheon
| Model | Marquetry 1, Marquetry 3, Marquetry 4 , Marquetry 6, Solid |
| Cover | PORTASYNCHRO 3D, PORTAPERFECT 3D, Portalamino, CPL HQ 0.2, CPL HQ 0.7, GLADSTONE, NATURAL VENEER SELECT, NATURAL VENEER OAK, NATURAL VENEER SATIN OAK |
| Color | WENGE WHITE, NORVEGIAN PINE, SILVER ACACIA, HONEY ACACIA, SCARLET OAK, DARK OAK, CAPRI 1, CAPRI 3, HAVANA OAK, CALIFORNIA OAK, SCANDINAVIAN BUK, CLASSICAL OAK, SIBERIAN OAK, SOUTHERN OAK, SCANDINAVIAN OAK, Dab Hamilton, Silver Dab, WHITE, GREY EUROINVEST, ANTHRACITE HPL/CPL, OAK MILANO 1, OAK MILANO 2, OAK MILANO 4, OAK MILANO 5, PORTA BEECH, WHITENED WALNUT, WALNUT MODENA 1, STRUCTURE DARK, CONCRETE LIGHT, CONCRETE DARK, NATURAL HIKORY, BLACK, WHITE, GREY EUROINVEST, ANTHRACITE HPL/CPL, OAK MILANO 1, OAK MILANO 2, OAK MILANO 4, OAK MILANO 5, PORTA BEECH, WHITENED WALNUT, WALNUT MODENA 1, STRUCTURE DARK, CONCRETE LIGHT, CONCRETE DARK, Natural Hickory, Dark, NATURAL HALIFAX, OAK, DARK WALNUT, OAK, TABACCO, MOCCA, NERO, Dark, WHITE OAK, SAND OAK, BROWN OAK, BRIGHT OAK, MALIBU OAK |
PORTA OSLO
Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF.
PORTA ART DECO
UV acrylic paint is highly resistant to: - dirt (coff ee, alcohol, grease) - abrasion - scratches - impacts.
PORTA DUO
Door leaf construction - The door leaf consists of: a wide, painted panel and a narrow stile covered with natural or synthetic veneer. For a glazed model we use 8 mm thick, frosted, tempered glass which is a construction element of the door leaf. Painted white part has a satin smooth surface which is achieved thanks to UV painting technology. Natural veneer is protected with ecological water varnishes, hardened under UV lamp (semi-matt effect).
PORTA DESIRE UV
Door leaf construction - Honeycomb or hollow chipboard core reinforced with glued wood rails and stiles (at an extra charge). The construction is skinned with HDF. Satin look, smooth surface is achieved thanks to UV painting technology. Model 3 and 4 with decorative door inlays (inlays colours: silver or black).
PORTA GRANDE UV
Door leaf construction - Satin look, smooth surface is achieved thanks to UV painting technology. It is possible to produce model A.1 with a mirror on one or on both sides. If the mirror is only on one side, there is a solid board on another side. There is a possibility to choose decorative slats made of solid oak, which are flush with the surface of door leaf panels (model F). Another option are slats in synthetic or natural veneer or brushed aluminium which are recessed in comparison to the surface of door leaf panels (model G).
PORTA ROYAL PREMIUM
Door leaf construction - Stabilising infill or chipboard core (extra charge) skinned with embossed HDF.
PORTA VECTOR PREMIUM
Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF.
PORTA SCANDIA PREMIUM
Door leaf construction - Stabilising infill or hollow chipboard core (extra charge) skinned with embossed HDF.
PORTA FOCUS PREMIUM
Door leaf construction - Honeycomb or hollow chipboard core reinforced with rails and stiles (at an extra charge). The construction is skinned with HDF. Glazed models come with 8 mm thick, frosted tempered glass, which is an element of the construction.
PORTA LUMUA, NATURA LUMIA
Loft-style door, with elegant wooden beams and transparent tempered glass 6 mm., with passive handle and hidden hinges
PORTA VERTE HOME, GROUP B
Door leaves contain rails, slim panels and 4 mm thick, frosted, tempered glass. Combination of those depends on a model.